Users Guide

Dell EMC Networking CLI 104
deny | permit (IP ACL) The deny command denies traffic if the
conditions defined in the deny statement are
matched. The permit command allows traffic if
the conditions defined in the permit statement
are matched.
ML
deny | permit (Mac-Access-
List-Configuration)
The deny command denies traffic if the
conditions defined in the deny statement are
matched. The permit command allows traffic if
the conditions defined in the permit statement
are matched.
ML
ip access-group Attaches a specified access-control list to an
interface.
GC or
IC
mac access-group Attaches a specific MAC Access Control List
(ACL) to an interface in the in-bound
direction.
GC or
IC
mac access-list extended Creates the MAC Access Control List (ACL)
identified by the name parameter.
GC
mac access-list extended
rename
Renames the existing MAC Access Control List
(ACL) name.
GC
remark Adds a comment to an ACL rule. IPAF4,
IPAF,
ML,
ARPA
service-acl input Blocks Link Local Protocol Filtering (LLPF)
protocol(s) on a given port.
IC
show access-lists interface Displays interface ACLs. PE
show service-acl interface Displays the status of LLPF rules configured on
a particular port or on all the ports.
PE
show ip access-lists Displays an Access Control List (ACL) and all
of the rules that are defined for the ACL.
PE
show mac access-lists Displays a MAC access list and all of the rules
that are defined for the ACL.
PE
a. For the meaning of each Mode abbreviation, see Mode Types .
Command Description Mode
a