Users Guide

Security Commands 1040
console(config-if-vlan1)#exit
console(config)#radius server source-interface vlan 1
radius server timeout
Use the radius server timeout command in Global Configuration mode to set
the interval for which a switch waits for a server to reply. To restore the
default, use the no form of this command.
Syntax
radius server timeout timeout
no radius server timeout
• timeout — Specifies the timeout value in seconds. (Range: 1–30)
Default Configuration
The default value is 15 seconds.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example sets the interval for which a switch waits for a server to
reply to 5 seconds.
console(config)#radius server timeout 5
radius server vsa send authentication
Use the radius server vsa send authentication command to enable the switch
to process vendor-specific attributes during authentication.
Syntax
radius server vsa send authentication
no radius server vsa send authentication