Users Guide

Dell EMC Networking CLI 106
Auto-VoIP
CDP Interoperability
Command Description Mode
a
a. For the meaning of each Mode abbreviation, see Mode Types .
switchport voice detect auto Enables the VoIP Profile on all the interfaces of
the switch.
GC or
IC
show switchport voice Displays the status of auto-voip on an interface
or all interfaces.
PE
Command Description Mode
a
a. For the meaning of each Mode abbreviation, see Mode Types .
clear isdp counters Clears the ISDP counters. PE
clear isdp table Clears entries in the ISDP table. PE
isdp advertise-v2 Enables the sending of ISDP version 2 packets
from the device.
GC
isdp enable Enables ISDP on the switch. GC or
IC
isdp holdtime Configures the hold time for ISDP packets that
the switch transmits.
GC
isdp timer Sets period of time between sending new ISDP
packets.
GC
show isdp Displays global ISDP settings. PE
show isdp entry Displays ISDP entries. PE
show isdp interface Displays ISDP settings for the specified
interface.
PE
show isdp neighbors Displays the list of neighboring devices. PE
show isdp traffic Displays ISDP statistics. PE