Users Guide

Security Commands 1122
User Guidelines
The administrator must enable redirect mode before executing this
command. It is not necessary to enter the http/https header information.
Only enter the host name and other information that might be required to
perform the redirect. HTTP to HTTPS redirection and HTTPS to HTTP
redirection are not supported.
Example
console(config-cp 2)#redirect-url www.dell.com
session-timeout
Use the session-timeout command to configure the session timeout for a
captive portal configuration. Use the no form of this command to reset the
session timeout to the default.
Syntax
session-timeout timeout
no session-timeout
• timeout — Session timeout. 0 indicates timeout not enforced (Range: 0–
86400 seconds).
Default Configuration
There is no session timeout by default.
Command Mode
Captive Portal Instance mode.
User Guidelines
Captive portal maintains a table of authenticated users. It is recommended
that a timeout be configured for guest users to avoid orphan sessions filling
up the authenticated users table. User sessions can be terminated with the no
user command in captive portal configuration mode or the captive-portal
client deauthenticate command in Privileged Exec mode.