Users Guide

Dell EMC Networking CLI 113
Ethernet Ring Protection
Command Description Mode
a
ethernet ring g8032
profile
Creates Ethernet ring profile and enters Ethernet
ring profile configuration mode
GC
timer Configures the timer expiry values for an Ethernet
ring profile.
ERP
non-revertive Enables non-revertive mode for an Ethernet ring
profile.
ERP
ethernet ring g8032 Creates an Ethernet ring and enters Ethernet Ring
Configuration mode
GC
port0 Configures a link to participate in Ethernet ring
protection as an East ring link.
ERC
port1 Configures a link to participate in Ethernet ring
protection as a West ring link.
ERC
open-ring Configures a protection ring as a sub-ring. ERC
instance Configures an Ethernet ring instance and enter
Ethernet Ring Instance Configuration mode.
ERC
profile Associates an Ethernet ring protection profile with
an Ethernet Ring Instance Configuration mode.
ERI
rpl Configures the Ethernet Ring Protection Link
(RPL) and role of the associated ring node.
ERI
inclusion-list Selects the VLANs protected by the Ethernet ring
protection instance.
ERI
ethernet tcn-
propagation
Enables topology change notification from a sub-
ring to the major ring.
IC
aps-channel Enters into Ethernet Ring Protection APS-channel
Configuration mode.
ERI
level Selects the maintenance level of Continuity Check
Messages (CCMs) to be monitored.
ERIC
raps-vlan Associates the VLAN to be used for R-APS
messages for the ERP instance.
ERIA
g8032 Controls protection switching transitions and faults
manually.
PE