Users Guide

Security Commands 1136
CP Name................................... cp1
Operational Block
Interface Interface Description Status Status
--------- ---------------------------------------- ------------ ---------
Gi1/0/1 Unit: 1 Slot: 0 Port: 1 Gigabit - Level Disabled Blocked
console#show captive-portal configuration 1 interface gi1/0/1
CP ID..................................... 1
CP Name................................... cp1
Interface................................. Gi1/0/1
Interface Description..................... Unit: 1 Slot: 0 Port: 1 Gigab...
Operational Status........................ Disabled
Disable Reason............................ Interface Not Attached
Block Status.............................. Not Blocked
Authenticated Users....................... 0
show captive-portal configuration locales
Use the show captive-portal configuration locales command to display
locales associated with a specific captive portal configuration.
Syntax
show captive-portal configuration cp-id locales
• cp-id — Captive Portal Configuration ID.
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
There are no user guidelines for this command.
Example
console#show captive-portal configuration 1 locales
Locale Code
---------------