Users Guide

Security Commands 1196
DSA key was generated.
SSH Public Key Authentication is enabled.
Active incoming sessions:
IP Address User Name Idle Time SessionTime
------------- -------------------- -------------- --------------
10.240.1.122 John 00:00:00 00:00:08
show ssh
Use the show ssh command to display the outbound SSH configuration and
session count.
Syntax
show ssh
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec, Global Configuration, and all sub-modes
Example
console(config)#show ssh
Command History
Command introduced in firmware release 6.6.2.