Users Guide

Layer 3 Routing Commands 1238
• ipv6-address—The IPv6 address of a configured neighbor reachable over
an IPv6 VLAN routing interface.
• vlan-id—If specified, the VLAN on which the IPv6 address is configured.
Default Configuration
No BFD neighbors are configured by default.
Command Mode
Router BGP Configuration mode
User Guidelines
There are no user guidelines for this command.
Command History
Introduced in version 6.2.0.1 firmware.
Example
console(config)# router bgp
console(config-router)# neighbor 172.16.11.6 fall-over bfd
show bfd neighbor
This command displays the neighbors for which BFD has established
adjacencies.
Syntax
show bfd neighbor [details] [ip-address]
• details —Display additional information regarding each BFD neighbor,
including sent and received message counts.
• ip-address —The IPv4 or IPv6 address of a BFD neighbor. Limits the
output to the specific neighbor.
Default Configuration
There is no default configuration for this command.