Users Guide

Dell EMC Networking CLI 136
show vlan association mac Displays the VLAN associated with a specific
configured MAC address.
PE
show vlan association subnet Displays the VLAN associated with a specific
configured IP subnet.
PE
show vlan private-vlan Displays information about the configured
private VLANs.
PE
switchport access vlan Configures the PVID VLAN ID when the
interface is in access mode.
IC
switchport dot1q ethertype
(Global Configuration)
Defines additional QinQ tunneling TPIDs for
matching in the outer VLAN tag of received
frames.
GC
switchport general forbidden
vlan
Forbids adding specific VLANs to a port. IC
switchport general
acceptable-frame-type
tagged-only
Discards untagged frames at ingress. IC
switchport general allowed
vlan
Adds or removes VLANs from a port in General
mode.
IC
switchport general ingress-
filtering disable
Disables port ingress filtering. IC
switchport general pvid Configures the PVID when the interface is in
general mode.
IC
switchport mode Configures the VLAN membership mode of a
port.
IC
switchport mode private-
vlan
Defines a private VLAN association for an
isolated or community interface or a mapping
for a promiscuous interface.
IC
switchport mode dot1q-
tunnel
Enables QinQ tunneling on customer edge
(CE) interfaces.
IC
switchport private-vlan Defines a private VLAN association for an
isolated or community port or a mapping for a
promiscuous port.
IC
switchport trunk Adds or removes VLANs from a trunk port. IC
Command Description Mode
a