Users Guide

Layer 3 Routing Commands 1379
Example
console(config-router)#show ip bgp listen range
Listen Range .................................. 10.27.0.0/16
Inherited Template ............................ template_10_27
Member ASN State
---------------- ----- -----------
10.27.8.189 65001 OPENCONFIRM
10.27.128.235 0 ACTIVE
Listen Range .................................. 15.15.0.0/24
Inherited Template ............................ template_15_15
Member ASN State
---------------- ----- -----------
show ip bgp neighbors
The show ip bgp neighbors command shows details about BGP neighbor
configuration and status.
Syntax
show ip bgp [vrf vrf-name] neighbors [neighbor-address]
• neighbor-address—(Optional) The IPv4 address of a neighbor. Used to
limit the output to a single neighbor.
• vrf vrf-name — Displays the aggregate address information associated
with the named VRF.
Default Configuration
By default, information about the global VRF is shown.
Command Mode
User Exec mode, Privileged Exec mode, Global Configuration mode and all
sub-modes.