Users Guide

Dell EMC Networking CLI 143
RADIUS
Command Description Mode
a
acct-port Sets the port that connects to the RADIUS
accounting server.
R
attribute 6 Configures processing of the RADIUS Service-
Type attribute.
R
attribute 8 Configures the switch to send the RADIUS
Framed-IP-Address attribute in the Access-
Request message sent to a specific RADIUS
authentication server.
R
attribute 25 Enables the switch to send the RADIUS Class
attribute as supplied by the RADIUS server in
accounting messages sent to the specific
accounting server.
R
attribute mac format Configures the format of the Original-Called-
Number (30), Calling-Station-ID (31), NAS-
Identifier (32) attributes sent to the RADIUS
server in Access-Request and Acct-Request
messages for a RADIUS server.
R
attribute 32 Configures the format of the NAS-Identifier
sent to the RADIUS server in Access-Request
and Acct-Request messages.
R
attribute 44 Enables sending the Acct-Session-ID in Access-
Request messages.
R
attribute 168 Enables the switch to send the RADIUS
Framed-IPv6-Address attribute in accounting
messages sent to the RADIUS accounting
server.
R
authentication event fail
retry
Sets the number of times authentication may
be reattempted by the user for the RADIUS
method for an IEEE 802.1X supplicant.
GC
auth-port Sets the port number for authentication requests
of the designated radius server
.
R
automate-tester Configures liveness checking. R