Users Guide

Layer 3 Routing Commands 1432

Command History

Introduced in version 6.2.0.1 firmware.

Example

console#show ip prefix-list fred

ip prefix-list fred:

seq 5 permit 10.10.1.1/20 ge 22

seq 10 permit 10.10.1.2/20 le 30

seq 15 permit 10.10.1.2/20 ge 29 le 30

console#show ip prefix-list summary fred

ip prefix-list fred:

console#show ip prefix-list detail fred

ip prefix-list fred:

seq 5 permit 10.10.1.1/20 ge 22 (hitcount: 0)

seq 10 permit 10.10.1.2/20 le 30 (hitcount: 0)

seq 15 permit 10.10.1.2/20 ge 29 le 30 (hitcount: 0)

show ipv6 prefix-list

This command displays the contents of IPv6 prefix lists.

Syntax

show ipv6 prefix-list [detail [prefix-list-name] | summary [prefix-list-name]

| prefix-list-name [ipv6-prefix/prefix-length [longer] [first-match] | seq

sequence-number ]]

• detail | summary – (Optional) Displays detailed or summarized

information about all prefix lists.

• prefix-list-name – (Optional) The name of a specific prefix list.

Information is limited to this particular prefix list.

• ipv6-prefix - An IPv6 network assigned to the specified prefix list. This

argument must be in the form documented in RFC 2373 where the address is

specified in hexadecimal using 16-bit values between 0x00 and 0xff and

separated by colons.