Users Guide

Dell EMC Networking CLI 144
deadtime Improves RADIUS response times when a server
is unavailable by causing the unavailable server
to be skipped.
R
key Sets the authentication and encryption key for all
RADIUS communications between the switch
and the RADIUS daemon
.
R
msgauth Enables the message authenticator attribute to
be used for the RADIUS Authenticating server
being configured.
R
name (RADIUS Server) Assigns a list name to a RADIUS server R
primary Specifies that a configured server should be the
primary server in the group of authentication
servers which have the same server name.
R
priority Specifies the order in which the servers are to be
used, with 0 being the highest priority.
R
radius server attribute 4 Sets the network access server (NAS) IP address
for the RADIUS server.
GC
radius server attribute 6 Enables the switch to send the RADIUS
Service-Type attribute in authentication
messages sent to the authentication server.
GC
radius server attribute 8 Enables the switch to send the RADIUS
Framed-IP-Address attribute in authentication
messages sent to the authentication server.
GC
radius server attribute 25 Globally enables the switch to send the
RADIUS Class attribute as supplied by the
RADIUS server in accounting messages sent to
the accounting server.
GC
radius server attribute 32 Configures the content of the NAS-Identifier
sent to the RADIUS server in Access-Request
and Acct-Request messages.
GC
radius server attribute 44 Enables sending the Acct-Session-ID in Access-
Request messages.
GC
Command Description Mode
a