Users Guide

Dell EMC Networking CLI 148
dot1x system-auth-control Enables 802.1x globally. GC
authentication monitor Enables authentication monitor mode globally. GC
dot1x timeout Sets the values of the various 802.1x state
machine timers.
IC
authentication timer
reauthenticate
Sets the number of seconds between
reauthentication attempts.
IC
auth-type Sets the accepted authorization types for
RADIUS CoA clients.
DRC
client Sets the CoA client parameters. DRC
ignore Sets the switch to ignore certain authentication
parameters from dynamic RADIUS clients.
DRC
port Sets the port on which to listen for CoA and
disconnect requests from authorized dynamic
RADIUS clients.
DRC
server-key Configures a global shared secret that is used for
all dynamic RADIUS clients that do not have an
individual shared secret configured.
DRC
show dot1x Displays 802.1X status for the switch or the
specified interface.
PE
show authentication
authentication-history
Displays the dot1x authentication events and
information during successful and unsuccessful
dot1x authentication processes.
PE
show authentication clients Displays detailed information about the users
who have successfully authenticated on the
system or on a specified port.
PE
show dot1x interface Shows the status of MAC Authentication
Bypass.
PE
show dot1x interface
statistics
Displays 802.1X statistics for the specified
interface.
PE
clear authentication
authentication–history
Clears the authentication history table captured
during successful and unsuccessful
authentication.
PE
Command Description Mode
a