Users Guide

Dell EMC Networking CLI 149
Captive Portal
authentication event no-
response
Sets the guest VLAN on a port. IC
authentication timeout
guest-vlan-period
Sets the number of seconds that the switch
waits before authorizing the client if the client
is a dot1x unaware client.
IC
authentication event fail Specifies the unauthenticated VLAN on a port. IC
show dot1x advanced Displays 802.1X advanced features for the
switch or specified interface.
PE
a. For the meaning of each Mode abbreviation, see Mode Types .
Command Description Mode
a
authentication timeout Configures the authentication timeout. CP
captive-portal Enables the captive portal configuration mode. GC
enable Globally enables captive portal. CPI
http port Configures an additional HTTP port for captive
portal to monitor.
CP
https port Configures an additional HTTPS port for
captive portal to monitor.
CP
show captive-portal Displays the status of captive portal. PE
show captive-portal status Reports the status of all captive portal instances
in the system.
PE
block Blocks all traffic for a captive portal
configuration.
CPI
configuration Enables the captive portal instance mode. CP
enable Enables a captive portal configuration. CPI
group Configures the group number for a captive
portal configuration.
CPI
interface Associates an interface with a captive portal
configuration.
CPI
Command Description Mode
a