Users Guide

Layer 3 Routing Commands 1536
RIP Routes..................................... 0
BGP Routes..................................... 0
External..................................... 0
Internal..................................... 0
Local........................................ 0
OSPF Routes.................................... 320
Intra Area Routes............................ 0
Inter Area Routes............................ 320
External Type-1 Routes....................... 0
External Type-2 Routes....................... 0
Reject Routes.................................. 0
Total routes................................... 324
Best Routes (High)............................. 324 (644)
Alternate Routes............................... 0
Leaked Routes.................................. 0
RFC5549 Routes - IPv4 with IPv6 nexthop........ 0
Route Adds..................................... 1629
Route Modifies................................. 1144
Route Deletes.................................. 1305
Unresolved Route Adds.......................... 0
Invalid Route Adds............................. 0
Failed Route Adds.............................. 0
Failed Kernel Route Adds....................... 0
Hardware Failed Route Adds..................... 0
Reserved Locals................................ 0
Unique Next Hops (High)........................ 68 (132)
Next Hop Groups (High)......................... 299 (599)
ECMP Groups (High)............................. 290 (585)
ECMP Routes.................................... 256
Truncated ECMP Routes.......................... 34
ECMP Retries................................... 26400
Routes with 1 Next Hop......................... 34
Routes with 2 Next Hops........................ 285
Routes with 3 Next Hops........................ 5
show ip traffic
Use the show ip traffic command to display IP statistical information of the
software IP stack. Refer to RFC 1213 for more information about the fields
that are displayed.
Syntax
show ip traffic [vrf vrf-name]