Users Guide

Dell EMC Networking CLI 156
Layer 3 Routing Commands
ARP (IPv4)
openflow Enables OpenFlow on the switch (if disabled)
and enters into OpenFlow configuration mode.
GC
passive Sets the switch to wait for the controller to
initiate the connection.
OFC
protocol-version Selects the version of the protocol in which to
operate.
OFC
show openflow Displays OpenFlow configuration and status. PE,
GC
a. For the meaning of each Mode abbreviation, see Mode Types .
Command Description Mode
a
arp Creates an Address Resolution Protocol (ARP)
entry.
GC
arp cachesize Configures the maximum number of entries in
the ARP cache.
GC
arp dynamicrenew Enables the ARP component to automatically
renew dynamic ARP entries when they age out.
GC
arp purge Causes the specified IP address to be removed
from the ARP cache.
PE
arp resptime Configures the ARP request response timeout. GC
arp retries Configures the ARP count of maximum request
for retries.
GC
arp timeout Configures the ARP entry age-out time. GC
clear arp-cache Removes all ARP entries of type dynamic from
the ARP cache.
PE
clear arp-cache management Removes all entries from the ARP cache learned
from the management port.
PE
ip local-proxy-arp Enables proxying of ARP requests. IC
Command Description Mode
a