Users Guide

Layer 3 Routing Commands 1584
Example
console#show ipv6 mld host-proxy groups
Interface................................ vlan 10
Group Address Last Reporter Up Time Member State Filter Mode
Sources
------------- ---------------- --------- ----------------- ------------- ---
FF1E::1 FE80::100:2.3 244 DELAY_MEMBER Exclude 2
Group Source List Expiry Time
------------------ ---------------
2001::1 00:02:40
2001::2 --------
FF1E::2 FE80::100:2.3 243 DELAY_MEMBER Include 1
Group Source List Expiry Time
------------------ ---------------
3001::1 00:03:32
3002::2 00:03:32
FF1E::3 FE80::100:2.3 328 DELAY_MEMBER Exclude 0
FF1E::4 FE80::100:2.3 255 DELAY_MEMBER Include 4
Group Source List Expiry Time
------------------ ---------------
4001::1 00:03:40
5002::2 00:03:40
4001::2 00:03:40
5002::2 00:03:40
show ipv6 mld host-proxy interface
Use the show ipv6 mld-proxy interface command to display a detailed list of
the host interface status parameters.
Syntax
show ipv6 mld host-proxy interface
Default Configuration
There is no default configuration for this command.
Group Source
List
The list of IP addresses of the sources attached to the multicast
group.
Expiry Time The time left for a source to get deleted.