Users Guide

Layer 3 Routing Commands 1589
show ipv6 protocols
Use the show ipv6 protocols command to display information about the
configured IPv6 routing protocols
Syntax
show ipv6 protocols
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged Exec mode, Global Configuration mode, all Configuration
submodes.
User Guidelines
There are no user guidelines for this command.
Example
console#show ipv6 protocols
Routing Protocol .............................. BGP
BGP Router ID ................................. 255.255.255.255
Local AS Number ............................... 1565001
BGP Admin Mode ................................ Enable
Maximum Paths ................................. Internal 3, External 2
Always compare MED ............................ TRUE
Maximum AS Path Length ........................ 100
Fast Internal Failover ........................ Disable
Fast External Failover ........................ Disable
Distance ...................................... Ext 126, Int 127, Local 126
Prefix List In ................................ none
Prefix List Out ............................... none
Redistributing:
Source Metric Dist List Route Map
--------- ---------- -------------------------------- ----------------------
----------
connected
Networks Originated: