Users Guide

Layer 3 Routing Commands 1630

No RP-Group mappings exist on this router.

If no static RP Group mapping exists on the router, the following message is

displayed:

No Static RP-Group mappings exist on this router.

show ip pim statistics

Use the show ip pim statistics command to display the count of PIM sparse

mode received control packets per VLAN.

Syntax

show ip pim statistics [vlan vlan-id]

vlan-id — The VLAN for which PIM sparse mode statistics are displayed.

Default configuration

There is no default configuration for this command.

Command Mode

Privileged Exec modes, Global Configuration mode and all submodes

User Guidelines

This command only displays output if pim sparse-mode is enabled.

The following statistics are displayed.

Field Description

Stat Rx: Packets received.

Tx: Packets transmitted.

Interface The PIM enabled routing interface.

Hello Number of PIM Hello messages.

Reg-Stop Number of PIM Register-Stop messages.

Join/Pru Number of PIM Join/Prune messages.

BSR Number of PIM Boot Strap messages.