Users Guide

Layer 3 Routing Commands 1644
show ipv6 mroute
Use the show ipv6 mroute command to display a summary or all the details of
the multicast table.
Syntax
show ipv6 mroute [group groupip [summary] | source sourceip [summary] |
static summary]
• group—Show the multicast route information for the specified multicast
group.
• source—Show the multicast route information for the specified multicast
source.
• static—Show the multicast route information for the specified static
multicast group.
• summary—Summarize the information.
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
This command has no user guidelines.
Example
console#show ipv6 mroute summary
Multicast Route Table Summary
Source IP Group IP Protocol IIF OIF Expiry
--------------- --------------- -------- --------- --------- -------
* FF43::5 PIMSM Vl11
Vl13
2001::5 FF43::5 PIMSM Vl12 Vl11
Vl13
console#show ipv6 mroute summary