Users Guide

Layer 3 Routing Commands 1815
Example
The following example displays the OSPF stub table.
console#show ipv6 ospf stub table
AreaId TypeofService Metric Val Import SummaryLSA
------------ ------------- ---------- -----------------
0.0.0.10 Normal 1 Enable
show ipv6 ospf virtual-links
Use the show ipv6 ospf virtual-links command to display the OSPF Virtual
Interface information for a specific area and neighbor or for all areas in the
system.
Syntax
show ipv6 ospf virtual-link [area-id neighbor-id | brief]
• area-id — Identifies the OSPF area whose virtual interface information is
being displayed.
• neighbor-id — Router ID of neighbor.
Default Configuration
This command has no default configuration.
Command Mode
User Exec, Privileged Exec mode, Global Configuration mode and all
Configuration submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays the OSPF Virtual Interface information for
area 1 and its neighbor.
console#show ipv6 ospf virtual-link 1 1.1.1.1
Area ID........................................ 1
Neighbor Router ID............................. 1.1.1.1
Hello Interval................................. 10
Dead Interval.................................. 40