Users Guide

Layer 3 Routing Commands 1844
Dell EMC Networking RIP does not support sending a tag value.
Redistribution of BGP-originated routes is only available on BGP-enabled
routers. Redistribution of BGP-originated routes into RIP is not
recommended.
Example
console(config-router)#redistribute ospf metric 10 match nssa-external 1
console(config-router)#redistribute connected metric 1
router rip
Use the router rip command in Global Configuration mode to enter Router
RIP mode.
Syntax
router rip
Default Configuration
RIP is globally enabled by default. RIP is not enabled on any interfaces by
default.
Command Mode
Global Configuration mode.
User Guidelines
Use the enable and no enable commands in router RIP mode to enable and
disable RIP globally.
Example
The following example enters Router RIP mode.
console(config)#router rip
console(config-router)#
show ip rip
Use the show ip rip command to display information relevant to the RIP
router.