Users Guide

Switch Management Commands 1948
Configuration and Image File
Commands
File System Commands
CLI commands allow the user to show the contents of the current directory in
the flash file system (dir command). These files may also be deleted from the
flash using the delete command or renamed with the rename command. Also,
the syntax of the copy command has been changed slightly to add additional
flash targets and sources for the above commands.
Command Line Interface Scripting
The configuration scripting feature allows the user to save the current Dell
EMC Networking configuration in text format. To modify the configuration
script file, follow these procedures:
1 Upload the file to a personal computer.
2 Edit the file.
3 Download the file to a Dell EMC Networking switch.
4 Apply it to the Dell EMC Networking system. With this feature in place,
the Dell EMC Networking administrator has the flexibility of creating
configuration scripts and then applying the scripts to several devices.
boot system
Use the boot system command to specify the system image that the device
loads at startup.
Syntax
boot system [unit-id][active|backup]
• unit-id—Unit to be used for this operation. If absent, command
executes on this node.
• active—Boot from the currently active image.
• backup—Boot from the backup image.