Users Guide

Dell EMC Networking CLI 197
Unicast Reverse Path Forwarding
Virtual Router
tunnel destination Specifies the destination transport address of
the tunnel.
IC
tunnel mode ipv6ip Specifies the mode of the tunnel. IC
tunnel source Specifies the source transport address of the
tunnel, either explicitly or by reference to an
interface.
IC
a. For the meaning of each Mode abbreviation, see Mode Types .
Command Description Mode
a
a. For the meaning of each Mode abbreviation, see Mode Types .
system urpf enable Globally enables uRPF checking of routes. GC
ip verify unicast source Enable loose uRPF checks on an interface. IC
Command Description Mode
a
a. For the meaning of each Mode abbreviation, see Mode Types .
description Assigns descriptive text to the VRF instance. VR
ip vrf Creates a virtual router with a specified name
and enters Virtual Router Configuration mode.
GC
ip vrf forwarding Associates an interface with a VRF instance. IC or
IR
maximum routes Reserves the number of routes allowed and sets
the maximum limit on the number of routes for
a virtual router instance in the total routing
table space for the router.
VR
show ip vrf Shows the interfaces associated with a VRF
instance.
PE
Command Description Mode
a