Users Guide

Switch Management Commands 2003
DHCPv6 Server Commands
Dell EMC Networking N2000/N2100-ON/N2200-ON/N3000-
ON/N3100-ON/N3200-ON Series Switches
clear ipv6 dhcp
Use the clear ipv6 dhcp command to clear DHCPv6 statistics for all
interfaces or for a specific interface.
Syntax
clear ipv6 dhcp {statistics | interface vlan vlan-id statistics}
• vlan-id — Valid VLAN ID.
• statistics — Indicates statistics display if VLAN is specified.
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode
User Guidelines
This command has no user guidelines.
Examples
The following examples clears DHCPv6 statistics for VLAN 11.
console#clear ipv6 dhcp interface vlan 11 statistics\
dns-server (IPv6 DHCP Pool Config)
Use the dns-server command in IPv6 DHCP Pool Configuration mode to set
the IPv6 DNS server address which is provided to a DHCPv6 client by the
DHCPv6 server. DNS server address is configured for stateless server support.