Users Guide

Switch Management Commands 2019
HiveAgent Commands
The commands in this section enable configuration of the Dell HiveAgent.
HiveAgent commands are not supported on the N2200 or N3200 Series
switches.
eula-consent
Use the eula-consent command to accept or decline the end-user license
agreement (EULA) for the hive agent. If accepted, the latest version of the
HiveAgent starts. If declined, all Hive Agent applications are stopped.
Syntax
eula-consent {hiveagent} {accept | reject}
• hiveagent—Enter the keyword hiveagent to either accept or reject the
EULA for the HiveAgent.
• accept — Accepts the EULA for the specified service.
• reject — Rejects the EULA for the specified service.
Default Configuration
The default is eula-consent hiveagent accept.
Command Mode
Global Configuration
User Guidelines
Messages are shown for both the accept and reject use cases with information
directing the user to URLs for further information. If the user rejects or has
not yet accepted the EULA, the configuration mode for the specified service
is not usable. If there is existing configuration for that feature, the
configuration is not removed, but the feature is disabled.