Users Guide

Switch Management Commands 2032
Command Mode
Privileged Exec mode
User Guidelines
This command has no user guidelines.
Example
The following example deletes all entries from the host name-to-address
cache.
console#clear host *
clear ip address-conflict-detect
Use the clear ip address-conflict-detect command to clear the address
conflict detection status in the switch.
Syntax
clear ip address-conflict-detect [vrf vrf-name]
• vrf-name—The name of the VRF instance on which the command
operates. If no VRF parameter is given, counters for the default (global)
router instance is cleared.
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode
User Guidelines
The VRF identified in the parameter must have been previously created or an
error is returned. Virtual Router Configuration mode is only available on the
Dell EMC Networking N3000-ON/N3100-ON/N3200-ON switches.
Example
console#clear ip address-conflict-detect