Users Guide

Switch Management Commands 2042
• name — Host name.
• address — IP address of the host.
Default Configuration
No host is defined.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example defines a static host name-to-address mapping in the
host cache.
console(config)#ip host accounting.dell.com 176.10.23.1
ip name-server
Use the ip name-server command in Global Configuration mode to define
available IPv4 or IPv6 name servers. To delete a name server, use the no form
of this command.
Syntax
ip name-server server-address1 [server-address2 … server-address8]
no ip name-server [server-address1 … server-address8]
• server-address — Valid IPv4 or IPv6 addresses of the name server. (Range:
1–255 characters)
Default Configuration
No name server IP addresses are specified.
Command Mode
Global Configuration mode