Users Guide

Switch Management Commands 2142
Command Mode
Privileged Exec mode.
User Guidelines
Debug output should be enabled with caution. Switch behavior may be
adversely affected by the additional processing load incurred from enabling
debug.
Example
console#debug spanning-tree bpdu
debug tacacs
Use the debug tacacs command to enable debug tracing of TACACS+
debugging.
Syntax
debug tacacs { packet [ receive | transmit] | accounting | authentication }
no debug tacacs { packet | accounting | authentication }
• packet receive—Enable debugging for received TACACS packets.
• packet transmit—Enable debugging for transmitted TACACS packets.
• accounting—Enable debugging for TACACS accounting packets.
• authentication—Enable debugging for TACACS authentication packets.
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode
User Guidelines
Debug commands should be used with caution. Switch behavior may be
adversely affected by the additional processing load incurred by enabling
debug output. Use of debug level logging when performing operations such as
switch failover is not recommended.