Users Guide

Dell EMC Networking CLI 217
banner motd
acknowledge
Acknowledges message-of-the-day banner. GC
buffers Configures the rising and falling thresholds for
the issuance of the message buffer SNMP trap
and notification via a SYSLOG message.
GC
clear checkpoint
statistics
Clears the statistics for the checkpointing
process.
GC
clear counters stack-
ports
Clears the statistics for all stack-ports. PE
connect Connects to the serial console of a different
stack member.
PE
exit Disconnects the serial connection to the remote
unit.
UE
hostname Specifies or modifies the switch host name. GC
initiate failover Forces failover of management unit. GC
load-interval Loads the interface utilization measurement
interval.
IC
locate Locates a switch by LED blinking. PE
logout Disconnects the serial connection to a remote
unit on a stack member.
UE
member Preconfigures a stack member. SG
memory free low-
watermark
Configures the notification of a low memory
condition on the switch for the issuance of the
CPU overload SNMP trap and notification via a
SYSLOG message.
GC
nsf Specifies non-stop forwarding. GC
ping Sends ICMP echo request packets to another
node on the network.
UE
process cpu threshold Configures the rising and falling thresholds for
the issuance of the CPU overload SNMP trap
and notification via a SYSLOG message.
GC
quit Disconnects the serial connection to the remote
unit on a stack member.
UE
Command Description Mode
a