Users Guide

Switch Management Commands 2181
Prefix Model Level Read Write Notify
--------------------- ---------- ----- ------------- -------- -------- -----
---
DefaultWrite "" V1 NoAuth-NoPriv Default Default Default
DefaultWrite "" V2 NoAuth-NoPriv Default Default Default
DefaultWrite "" V3 NoAuth-NoPriv Default Default Default
DefaultWrite "" V3 Auth-NoPriv Default Default Default
DefaultWrite "" V3 Auth-Priv Default Default Default
Command History
The example was updated in release 6.4.
show snmp user
Use the show snmp user command to display the configuration of users.
Syntax
show snmp user [username]
• username — Specifies the name of the user. (Range: 1-30)
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
The user name accepts any printable characters except a question mark.
Enclose the string in double quotes to include spaces within the name. The
surrounding quotes are not used as part of the name. The CLI does not filter
illegal characters and may accept entries up to the first illegal character or
reject the entry entirely.
Example
The following example displays the configuration of users with the user name
specified.