Users Guide

Switch Management Commands 2193
switch, as required by RFC 2274. Because of this deletion, if the local value of
engineID changes, the security digests of SNMPv3 users will be invalid and
the users will have to be reconfigured.
Example
The following example configures the Engine ID automatically.
console(config)# snmp-server engineID local default
snmp-server filter
Use the snmp-server filter command in Global Configuration mode to create
or update a Simple Network Management Protocol (SNMP) server filter
entry. To remove the specified SNMP server filter entry, use the no form of
this command.
Syntax
snmp-server filter filter-name oid-tree {included | excluded}
no snmp-server filter filter-name [oid-tree]
• filter-name — Specifies the label for the filter record that is being
updated or created. The name is used to reference the record. (Range: 1-
30 characters.)
• oid-tree — Specifies the object identifier of the ASN.1 subtree to be
included or excluded from the view. To identify the subtree, specify a
text string consisting of numbers, such as 1.3.6.2.4, or a word, such
as system. Replace a single subidentifier with the asterisk (*) wild card
to specify a subtree family; for example, 1.3.*.4.
• included — Indicates that the filter type is included.
• excluded — Indicates that the filter type is excluded.
Default Configuration
No filter entry exists.
Command Mode
Global Configuration mode