Users Guide

Switch Management Commands 2215
Default Configuration
This command has no defaults.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
There are no guidelines for this command.
Command History
Introduced in version 6.3.0.1 firmware.
Example
console# show support-assist status
SupportAssist: Enabled
SupportAssist Server: https://stor.g3.ph.dell.com (resolved)
EULA: Accepted
Proxy Server: 172.167.33.101
support-assist
Use the support-assist command to enable support-assist configuration mode
if the EULA has been accepted. Use the no form of the command to remove
the configured SupportAssist information.
Syntax
support-assist
no support-assist
Proxy port: 8080
Activity
State Last Start Last
Success
Communication
Status
Success MM/DD/YYYY
HH:mm:ss AM
MM/DD/YYYY
HH:mm:ss AM
Full Transfer Success MM/DD/YYYY
HH:mm:ss AM
MM/DD/YYYY
HH:mm:ss AM