Users Guide

Switch Management Commands 2284
Utilization is shown in Kbps.
Hash Algorithm Type
1 - Source MAC, VLAN, EtherType, source module and port Id
2 - Destination MAC, VLAN, EtherType, source module and port Id
3 - Source IP and source TCP/UDP port
4 - Destination IP and destination TCP/UDP port
5 - Source/Destination MAC, VLAN, EtherType, source MODID/port
6 - Source/Destination IP and source/destination TCP/UDP port
7 - Enhanced hashing mode
show interfaces advanced firmware
Use the show interfaces advanced firmware command to display the firmware
revision of the PHY for a port with upgradable firmware.
Syntax
show interfaces advanced firmware interface
• interface—A firmware upgradable Ethernet interface.
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
This command is only applicable to firmware upgradable interfaces. 1G
interfaces are never shown in the command output. Some 10G interfaces may
show as not firmware upgradable.
Example
console#show interfaces advanced firmware
Port Revision Part number
-------- ---------- -----------
Te1/0/1 0x411 BCM8727
Te1/0/2 0x411 BCM8727
Te1/0/3 0x411 BCM8727
Te1/0/4 0x411 BCM8727