Users Guide

Switch Management Commands 2289
Status...................................... Stale
Time Since Last Copy........................ 0 days 4 hrs 53 mins 22 secs
Time Until Next Copy........................ 28 seconds
Unit NSF Support
---- -----------
1 Yes
2 Yes
3 Yes
show power-usage-history
Use the show power-usage-history command to display the history of unit
power consumption for the unit specified in the command and total stack
power consumption. Historical samples are not saved across switch
reboots/reloads.
Syntax
show power-usage-history <unit-id>
• unit-id—Stack unit for which to display the power history. Range 1-12.
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
Power draw is measured at the power supplies. Power draw is not measured at
the interfaces.
This command is not available on the Dell EMC Networking N1100-ON
Series switches.
Example
console#show power-usage-history 1
Sampling Interval (sec)........................ 30
Total No. of Samples to Keep................... 168