Users Guide

Switch Management Commands 2300
Syntax
show supported cardtype [ cardindex ]
• cardindex — Displays the index into the database of the supported card
types. This index is used when preconfiguring a slot.
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
If a card index is entered, then the command displays information about
specific card types supported in the system. Card index values are specific to
each family of products. Use the generic form (without specifying an index)
to display all the card types for a product family.
The CID information is used when preconfiguring cards using the slot
command.
The following table explains the output parameters.
If you supply a value for cardindex, the following additional information
appears as shown in the table below.
Parameter Description
Card Index (CID) The index into the database of the
supported card types. This index is used
when preconfiguring a slot.
Card Model Identifier The model identifier for the supported
card type.
Parameter Description
Card Type The 32-bit numeric card type for the
supported card.