Users Guide

Switch Management Commands 2303
Example
The following example displays the information for supported switch types.
console#show supported switchtype
SID Switch Model ID
--- --------------------------------
1 N4032
2 N4032F
3 N4064
4 N4064F
The following example displays the format of the show supported switchtype
command.
console#show supported switchtype 1
Switch Type....................... 0xd8420001
Model Identifier.................. N4032
Switch Description................ Dell Networking N4032
Supported Cards:
Slot........................... 0
Card Index (CID)............... 1
Model Identifier............... Dell Networking N4032
Slot........................... 1
Card Index (CID)............... 5
Model Identifier............... Dell QSFP Card
Slot........................... 1
Card Index (CID)............... 6
Model Identifier............... Dell SFP+ Card
Slot........................... 1
Card Index (CID)............... 7
Model Identifier............... Dell 10GBase-T Card
show switch
Use the show switch command to display information about units in the
stack.
Syntax
show switch [ stack–standby | unit ]