Users Guide

Switch Management Commands 2307
Per Unit Status Parameters are explained as follows:
Examples
Example – Stack Status for the Switch
console#show switch 1
Switch............................ 1
Management Status................. Management Switch
Switch Type....................... 0xd8460001
Preconfigured Model Identifier.... N4064
Plugged-in Model Identifier....... N4064
Switch Status..................... OK
Switch Description................ Dell Networking N4064
Detected Code Version............. 6.0.0.0
Detected Code in Flash............ 6.0.0.0
SFS Last Attempt Status........... None
Standby Status This field indicates whether the switch is the
Standby Switch.
Preconfigured Model Identifier This field displays the model identifier of a
preconfigured switch ready to join the stack.
The Model Identifier is a 32-character field
assigned by Dell to identify the switch.
Plugged-In Model Identifier This field displays the model identifier of the
switch physically present in the stack. The
Model Identifier is a 32-character field assigned
by Dell to identify the switch.
Switch Status This field indicates the switch status. Possible
values for this state are: OK, Unsupported,
Code Mismatch, Cfg Mismatch, SDM
Mismatch, STM Mismatch, or NotPresent
Code Version This field indicates the detected version of code
on this switch.
Parameter Description Range Default
NSF Support Whether a unit
supports NSF
Yes or No Yes
Unit Description