Users Guide

Switch Management Commands 2320
• show ethernet cfm errors (N2200/N3000-ON/N3100-ON/N3200-ON
series only)
• show power inline firmware-version
• show version
• show interfaces transceiver properties
Tech support files are named tech-supportXXX.txt, where XXX is the date
and time stamp of the form YYMMDDHHMMSS. YY is the last two digits of
the year, MM is the month, DD is the day of the month, HH is the hour in
24-hour format, MM is the minute, and SS is the second.
Use the copy flash://techsupportXXX.txt <destination> form of the copy
command to copy the tech-support file from the switch.
A USB device must be plugged in to the USB port, and cleanly mounted, if
the usb parameter is given.
Default Value
This command has no defaults.
Example
console#show tech-support
***************** Show Version ******************
Switch: 1
System Description................ Dell Networking N4032, 6.0.0.0, Linux
2.6.32.9
Machine Description............... Dell Networking Switch
System Model ID................... N4032
Machine Type...................... Dell Networking N4032
Serial Number..................... 0000
Manufacturer...................... 0xbc00
Operating System.................. Linux 2.6.32.9
Burned In MAC Address............. 0011.2233.4455
System Object ID.................. 1.3.6.1.4.1.674.10895.3042
CPU Version....................... XLP308H-B2
SOC Version....................... BCM56842_A1
HW Version........................ 3
CPLD Version...................... 17