Users Guide

Switch Management Commands 2324
Machine Description............... Dell EMC Networking Switch
System Model ID................... N2224X-ON
Machine Type...................... Dell EMC Networking N2224X-ON
Serial Number..................... CN07VY62CES0096I0001
Manufacturer...................... 0xbc00
Burned In MAC Address............. 3C2C.307C.B100
System Object ID.................. 1.3.6.1.4.1.674.10895.3097
CPU Version....................... C3336
SOC Version....................... BCM56172_B0
HW Version........................ 1
CPLD Versions..................... System 01.06 CPU 00.05 LED 00.05
Image File........................ N2200v6.26.11.1
Software Capability............... Stack Limit = 12, VLAN Limit = 4093
stack
Use the stack command in Global Configuration mode to enter Stack
Configuration mode.
Syntax
stack
Default Configuration
This command has no default mode.
Command Mode
Global Configuration mode
User Guidelines
If no stack configuration appears in the saved config, it is built at runtime and
appears in the running config. The operator can save the stack configuration.
Switches that do not match the saved config (are of a different type than as
configured) after a reboot will show a config mismatch and do not join the
stack. Units that do not join the stack will show their interfaces as detached.
Example
The following example sets the console command mode to Stack Config.
console(config)#stack
console(config-stack)#