Users Guide

Switch Management Commands 2331
Default Configuration
port — Telnet TCP port (decimal 23) on the host.
Command Mode
User Exec, Privileged Exec mode
User Guidelines
The hostname parameter may be a fully or partially qualified domain name. A
hostname consists of a series of labels separated by periods. Each label may be
a maximum of 63 characters in length. The maximum length of the
hostname parameter is 256 characters. Refer to RFC 1035 Section 2.3.1 for
more information.
Example
Following is an example of using the telnet command to connect to
176.213.10.50.
console#telnet 176.213.10.50
Trying 176.213.10.50...
Connected to 176.213.10.50
Entering character mode...
Escape character is'^^'.
traceroute
Use the traceroute command to discover the routers that packets traverse
when traveling to their destination.
Syntax
traceroute [vrf vrf-name] [ip] ipaddress|hostname [init-ttl initTtl] [max-ttl
maxTtl] [max-fail maxFail] [interval interval] [count count] [port port]
[size size][source {src-ip-address|vlan vlan-id|loopback loopback-id}]
<cr> Press ENTER to execute the command.
port Enter the TCP port number.