Users Guide

Switch Management Commands 2344
Default Configuration
This command has no default configuration.
Command Mode
Time Range Configuration
User Guidelines
Only one absolute time entry is allowed per time-range. The time parameter
is referenced to the currently configured time zone.
Adding a conflicting periodic time range to an absolute time range will cause
the time range to become inactive. For example, consider an absolute time
range from 8:00 AM Tuesday March 1st 2011 to 10 PM Tuesday March 1st
2011. Adding a periodic entry using the weekend keyword will cause the time-
range to become inactive because Tuesdays are not on the weekend.
Example
console#time-range timeRange_1
console(config-time-range)#absolute end 12:00 16 Dec 2010
periodic
Use the periodic command to add a periodic time entry to a time range. The
time parameter is based off of the currently configured time zone. Use the no
form of this command to delete a periodic time entry from a time-range.
Syntax
periodic {days-of-the-week time } to {[days-of-the-week] time }
no periodic
• days-of-the-week—The first occurrence of this argument is the starting
day or days from which the configuration that referenced the time range
starts going into effect. The second occurrence is the ending day or days
from which the configuration that referenced the time range is no longer
in effect. If the end days-of-the-week are the same as the start, they can
be omitted.
This argument can be any single day or combinations of days: Monday,
Tuesday, Wednesday, Thursday, Friday, Saturday, Sunday.