Users Guide

Switch Management Commands 2346
Thursday, Friday) but with after-work hours (9pm to 11pm). The
administrator wants to permit/deny HTTP traffic for this time-range, but the
entire time-range is invalid due to conflicting entries. The absolute entry is
forced to inactive because the periodic entry time is not yet in effect.
Examples
console#time-range timeRange_2
console(config-time-range)#periodic monday 00:00 to tuesday 12:30
console(config-time-range)#periodic tuesday 13:00 to wednesday 12:00
console(config-time-range)#periodic wednesday 12:30 to thursday 20:00
console(config-time-range)#periodic weekend 18:00 to 20:00
show time-range
Use the show time-range command to display a time range and all the
absolute/periodic time entries that are defined for the time range. The
[name] parameter is used to identify a specific time range to display. When
the [name] parameter is not specified, all the time ranges defined in the
system are displayed.
Syntax
show time-range [name]
• name—A specific time range to display
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
This command outputs the following.