Users Guide

Switch Management Commands 2355
• line — Command to be executed. It must be an unambiguous
command from the Privileged Exec mode. Commands such as configure
are forbidden. Command line completion for the line parameter is
supported. Users may only execute commands for which they have the
appropriate privileges.
Default Configuration
This command has no default configuration.
Command Mode
All modes except Privileged Exec and User Exec modes.
User Guidelines
Command completion using the space bar is available when using this
command.
Example #1
console>en
console#configure
console(config)#interface gi1/0/1
console(config-if-Gi1/0/1)#d?
description dhcp do
dot1x duplex
console(config-if-Gi1/0/1)#do ? ! Help from privileged Exec level
console(config-if-Gi1/0/1)#do ?
application Start or stop an application.
arp Purge a dynamic or gateway ARP entry.
boot Select a boot image for use on the next reload.
captive-portal Manage captive portal clients.
clear Clear learned configuration or statistics.
configure Enter global config mode.
connect Connect console session to another stack unit.
copy Copy files to or from the switch.
debug Configure debug flags.
delete Delete a file.
dir Display directory information.
disconnect Close remote console session(s).
dot1x Initialize dot1x or reauthenticate clients.
enable Enter into user privilege mode.