Users Guide

Switch Management Commands 2356
erase Delete a file.
exit Exit privileged exec mode.
filedescr Set a text description for an image file.
help Display help for various special keys.
locate Blink the locator LED.
logout Exit this session. Any unsaved changes are lost.
monitor Configure packet monitoring.
ping Send ICMP echo packets to a specified IP address.
quit Exit this session. Any unsaved changes are lost.
release Release an in-band DHCP assigned address.
reload Reload stack or a switch in the stack.
rename Rename a file.
renew Renew an in-band DHCP assigned address.
script Manage and execute configuration scripts.
show Show configured settings and operational status.
telnet Open a telnet connection to another system.
terminal Configure console session parameters.
test Test a copper port. Disable EEE modes first!
traceroute Trace route to destination.
udld Reset UDLD disabled interfaces.
unmount Flush cache and un-mount a USB device.
write Copy running configuration to startup configuration.
console(config-if-Gi1/0/1)#do a?
application arp
enable
Use the enable command in User Exec mode to enter the Privileged Exec
mode.
Syntax
enable
Default Configuration
The default privilege level is 15.
Command Mode
User Exec and Privileged Exec modes