Users Guide

Switch Management Commands 2377
• number— The number of the SSH certificate to remove(between 1 to
2).
• openflow—Remove the openflow certificate and associated
information.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
The no crypto certificate openflow command erases the Certificate
Authority certificates used for validating the OpenFlow Controllers from the
switch. Issuing this command automatically disables and re-enables the
OpenFlow feature. New SSL certificates may be reloaded from the OpenFlow
Controller or may be manually loaded with the copy command.
Example
The following example removes the OpenFlow certificates from the switch
and resets the OpenFlow feature.
console(config)#no crypto certificate openflow
organization-name
Use the organization-name command to identify the legal name of the
organization requesting the certificate.
Syntax
organization-name name
• name— The legal name of the organization requesting the certificate.
Maximum length is 64 characters.
Default Configuration
By default, no organization name is configured.