Users Guide

Using the CLI 254
Track
Configuration
Mode
From Global
Configuration
mode, use the track
object-number ip
sla operation-
number command.
Switch (config-track)#
To exit to Global
Configuration
mode, use the
exit command,
or press
<Ctrl>+<Z>
to Privileged
Exec mode.
IP SLA
Configuration
Mode
From Global
Configuration
mode, use the ip sla
operation-number
command.
Switch (config-ip-sla)#
To exit to Global
Configuration
mode, use the
exit command,
or press
<Ctrl>+<Z>
to Privileged
Exec mode.
IP SLA ICMP
ECHO
Configuration
Mode
From IP SLA
Configuration
mode, use the
icmp-echo
destination-ip-
address command.
Switch (config-ip-sla-echo)#
To exit to Global
Configuration
mode, use the
exit command,
or press
<Ctrl>+<Z>
to Privileged
Exec mode.
Interface Configuration Modes
Gigabit Ethernet From Global
Configuration
mode, use the
interface
gigabitethernet
command. Or, use
the abbreviation
interface gi.
console (config-if-
Giunit/slot/port#
To exit to Global
Configuration
mode, use the
exit command,
or press
<Ctrl>+<Z>
to Privileged
Exec mode.
Table 2-5. Navigating CLI Command Modes (continued)
Command Mode Access Method Command Prompt Exit or Access
Previous Mode