Users Guide

Layer 2 Switching Commands 295

User Guidelines

There are no user guidelines for this command.

Examples

console#show access-lists interface control-plane

ACL Type ACL Name Sequence Number

-------- ------------------------------- ---------------

IPv6 ip61 1000

show ip access-lists

Use the show ip access-lists command to display an IP ACL and time-range

parameters.

Syntax

show ip access-lists [accesslistname]

• accesslistname—

The name used to identify the IP ACL.

Default Configuration

This command has no default configuration.

Command Mode

Privileged Exec mode, Global Configuration mode and all Configuration

submodes

User Guidelines

This command displays information about the attributes “icmp-type”, “icmp-

code”, “igmp-type,” “fragments,” “routing,” and “source and destination L4

port ranges.” It displays the committed rate, committed burst size and the

ACL rule hit count of packets matching the ACL rule. This matching packet

counter value rolls over upon reaching the maximum value

(18446744073709551615 or 2

-1).