Users Guide

Layer 2 Switching Commands 297
Rule Number: 1
Action......................................... permit
Match All...................................... FALSE
Protocol....................................... 6(tcp)
Source IP Address.............................. 1.2.3.4
Source IP Mask................................. 0.0.0.0
Source Layer 4 Operator........................ Equal To
Source L4 Port Keyword......................... 43
Destination IP Address......................... any
TCP Flags...................................... FIN (Ignore)
SYN (Set)
RST (Ignore)
PSH (Ignore)
ACK (Ignore)
URG (Ignore)
ACL Hit Count...................................... 43981900
Rule Number: 2
Action......................................... permit
Match All...................................... FALSE
Protocol....................................... 6(tcp)
Source IP Address.............................. any
Destination IP Address......................... 1.2.3.4
Destination IP Mask............................ 0.0.0.0
TCP Flags...................................... FIN (Ignore)
SYN (Set)
RST (Ignore)
PSH (Ignore)
ACK (Ignore)
URG (Ignore)
ACL Hit Count.................................. 1
The following examples show Dynamic ACLs configured for both the data
and voice VLAN.
IPv4 Data and Voice:
console#show ip access-lists
Current number of ACLs: 4 Maximum number of ACLs: 100
ACL Name Rules Count Interface(s) Direction
---------------------- ----- ----- ------------ ---------
IP-DACL-IN-Gi1/0/9#d 1 418 Gi1/0/9 Inbound
IP-VDACL-IN-Gi1/0/9#d 1 0 Gi1/0/9 Inbound
IPv6 Data and Voice: